A Aart's, Tim’s Quality Plumbing and Speedy Plumbing,
Expert Plumbing, Fair Pricing, No Job Too Small!

APPLIANCE HOOK-UPS
Price includes normal installation. Upgrades, difficult access, irregularities, code compliance may be extra.
• Professionally install dishwasher (new installation), up to 8´, no electrical work beyond final connection - $384.94
• Professionally install dishwasher (change out), no electrical work beyond final connection - $279.17
• Professionally connect ice maker using existing stub out behind refrigerator, install shut-off and up to 8´ of line - $175.86
• Professionally install ice maker water line (new installation) from sink, install shut-off valve under sink and run up to 12´ of line - $ 241.97
• Professionally install ice maker water line (new installation) from basement, install shut-off valve in basement and run up to 25´ of line - $357.34
• Professionally install gas range (new installation or conversion from electric), run gas line up to 10´ from available gas source, professionally hook up range (Permit is extra) - $600-$1000
• Professionally install gas range (change-out), hook up new range to existing gas line, level and check for leaks - $211.22
• Washing machine (change-out), professionally hook up to existing hook-ups - $128.92
• Clothes dryer (change-out), professionally hook up to existing hook-ups, level and check for leaks - $177.85
• Professionally hook up gas grill out side - $600-$1200
• Professionally change out gas grill outside - $198

CUSTOMER SUPPLIED PARTS
Price includes normal installation. Upgrades, difficult access, irregularities, code compliance may be extra.
Note: We cannot warranty customer supplied parts before, during or after installation.
• Professionally install customer´s kitchen sink faucet - $225.00
• Professionally install customer´s lav faucet, no pop-up - $198.00
• Professionally install customer´s lav faucet with pop-up - $235.00
• Professionally install customer´s pedestal sink lav faucet with pop-up - $285.00
• Professionally install customer´s pedestal lav sink and faucet - $495.00
(Backer board must be present for support)
• Professionally install customer´s 1 handle tub/shower faucet - $335.00
• Professionally install customer´s 2 handle tub/shower faucet - $345.00
• Professionally install customer´s 3 handle tub/shower faucet - $355.00
• Professionally install customer´s shower faucet only - $315.00
• Professionally install customer´s Roman tub faucet - $298.00
• Professionally install customer´s 2-piece toilet – $225.00 + $30.00 disposal fee for old toilet
• Professionally install customer´s 1-piece toilet – $225.00 + $50.00 disposal fee for old toilet
• Professionally install customer´s garbage disposal - $195.00
• Professionally install customer´s water heater - $400.00
• Professionally install customer´s water softener – $309.75 (change out)
• Professionally install customer´s water softener - $429.00 (new installation with by-pass valve)
• Professionally install customer´s outside frostfree faucet - $180.00
• Professionally install customer´s PB vacuum breaker & up to 20ft of pipe - $445.00
• Professionally install customer´s laundry faucet - $195.00
• Professionally install customer´s bar faucet - $195.00
• Professionally install customer´s sump pump - $195.00
• Professionally install customer´s sewer ejector - $249.00

KITCHEN FAUCET REPAIR & REBUILDING
Price includes normal installation. Upgrades, difficult access, irregularities, code compliance may be extra.
Delta 1 handle
• Complete 1h w/spray rebuild: springs, aerator, diverter, hose, spray - $228.88
• Complete 1h w/o spray rebuild: seats, springs, aerator and o-rings - $192.18
• Partial 1h rebuild: replace ball, cam & seats, springs, o-rings, aerator - $176.43
• Partial 1h rebuild: replace ball, 2 seats/springs - $133.42

Delta 2 handle
• 2h rebuild w/spray stems, seats, springs, aerator, div, o-rings, hose/ spr - $243.04
• 2h rebuild w/o spray stems, seats, springs, aerator - $206.35

Delta add ons:
• Take apart & inspect add on as necessary (add to base price) - $104.50
• Take apart & inspect add on as necessary 2nd faucet (add to base price) - $48.50
• Replace seats & springs set of 2 - $23.78
• Replace hot & cold Lucite handles on 2h faucet - $39.07
• Replace hot & cold metal handles on 2h faucet - $40.67
• Replace cam assembly for crystal handle Delta faucet rp61 - $23.36
• Replace ball assembly 1h Delta rp70 - $38.01
• Replace ball assembly for crystal handle Delta faucet rp212 - $27.80
• Replace diverter assembly for Delta k/s faucets w/spray rp320 - $26.76
• Replace aerator on Delta faucet rp3 - $21.95
• Replace o-rings kit for all Delta 2h deck faucets (ex/waterfall) - $26.45
• Replace cartridge for 2h Delta kit & lav faucets - $25.86

Moen 1 handle
• Complete 1h w/sp rebuild: aerator, cart clip, o-rings, div, hose & spray - $238.80
• Complete 1h w/o sp rebuild: cart clip, o-rings, and aerator - $181.62
• Partial 1h rebuild: Replace cart, aerator, clip, lube & inspect flush - $147.00

Moen 2 handle
• Complete 2h w/sp rebuild: o-rings, diverter, hose & spray, aerator - $218.45
• Complete 2h w/o spray rebuild: both cart., o-rings, aerator - $161.26
• Partial 2h rebuild: both cart. aerator, lube & inspect, flush - $154.07

Moen add ons:
• Take apart & inspect & install add on as necessary (add to base price) - $104.50
• Take apart & inspect add on as necessary 2nd faucet (add to base price) - $48.50
• Replace m101310 handle repair assembly kit for k/s faucets - $38.12
• Replace 91192 Moen diverter assembly for 1h Moen faucets - $47.25
• Install aerator - $12.58
• Install Moen magnum cartridge #122 31565-genuine parts - $42.49
• Install Moen cartridge #1224 - $30.35
• Install spray hose and head - $33.56
• Install o-ring kit for Moen spout - $15.06

Price Pfister
• Replace cartridge in k/s faucet Advante cartridge - $159.85
• Replace seats, hot & cold stems and washers - $166.83
• Replace seats, stems, washers and verve handle - $184.33
• Replace seats, stems, washers and Windsor handle - $184.31
• Replace aerator, seats & washers - $148.82

American Standard
• Replace hot & cold stems, aerator, seats and washers - $188.18
• Replace aerator, seats & washers - $148.60

Other brand faucets
• 2h Replace/resurface h & c faucet stems, seats, washers, aerator - $188.18
• 2h Replace/resurface h & c seats, washers & aerator - $148.60

Other brand faucet add ons:
• Take apart & inspect & install add on as necessary (add to base price) - $104.50
• Take apart & inspect add on as necessary 2nd faucet (add to base price) - $48.50
• Replace/resurface faucet seat and washer each side - $23.68
• Replace faucet stem each - $39.91
• Replace spout o-rings - $25.78
• Replace faucet aerator – standard - $14.15
• Moen swing & spray aerator – premier - $44.36
• Replace handle each - $29.75

BATH FAUCET REPAIR & REBUILDING
Price includes normal installation. Upgrades, difficult access, irregularities, code compliance may be extra.
Delta faucet
• Rebuild 1 handle: seats, springs, ball, cam, lube - $182.69
• Replace crystal handle & rebuild. Also cam, seats, springs & ball - $197.27
• Rebuild with seats, springs, aerator, ball & cam assy. lube - $191.85
• Rebuild 1handle with seats, springs, aerator, ball, cam assy. lube - $280.74
• Rebuild 2 handle with cartridge, aerator, seats & springs, lube - $179.87
• Rebuild 2 handle with seats, springs, stems & aerator, lube - $264.54

Delta / Moen add ons
• Take apart & inspect add on as necessary (add to base price) - $104.50
• Take apart & inspect add on as necessary 2nd faucet (add to base price) - $48.50
• Replace crystal handles on Delta (delex) 2h faucet rp5693 - $44.94
• Replace crystal handle w/button & screw for 1h faucet rp2389 - $26.36
• Replace handle button on 1h faucet w/crystal handle rp4211 - $9.80
• Replace two seats & springs in faucet rp4993 - $23.78
• Replace cartridge for 2h Delta kit & lav faucets - $25.86
• Replace escutcheon screws for all Delta faucets except Deltique, rp196 - $12.73
• Replace cam assy. W/adjusting ring for 1h faucets rp50 - $25.79
• Replace 96797 handle on Moen bath/shower 1 handle faucet - $49.00
• Replace 96791 handle on Moen chateau 1h lav faucet - $49.00
• Install aerator - $12.58
• Install Moen magnum cartridge #1225, 31565-genuine parts - $42.49
• Install Moen cartridge #1224 - $30.35

Moen faucet
• Replace Moen1h cartridge #1225. Flush, new aerator. lube - $181.00
• Replace Moen cart. In two1h lav faucets. Flush & lube - $232.17
• Replace 1200c Moen all brass cartridge in 1h lav faucet - $161.40
• Rebuild 2 Moen2h lav faucets with new cartridges & aerators, silicone - $275.0
• Rebuild 2h Moen lav faucet with cartridge & aerator. Flush & silicone - $175.66

BAR & LAUNDRY FAUCET REPAIR & REBUILD
Price includes normal installation. Upgrades, difficult access, irregularities, code compliance may be extra.
• 2h replace/re-surface h & c faucet stems, seats, washers, aerator - $188.18
• 2h replace/re-surface h & c seats, washers - $148.60
• Replace h & c washers and stem o-rings. Inspect seats & flush. - $135.00

UNDER SINK REPAIRS
Price includes normal installation. Upgrades, difficult access, irregularities, code compliance may be extra.
• Replace 1 ½" p-trap under sink - $128.95
• Replace 1 ¼" p-trap under sink - $118.95
• Replace 1 ½" 17 gauge chrome p-trap under sink - $140.00
• Replace 1 ½" 20 gauge chrome p-trap under sink - $140.00
• Replace 1 ½" continuous waste (end outlet) - $170.31
• Replace 1 ½" continuous waste (center outlet) - $176.14
• Replace waste lines w/disposal abs disposer kit, ptrap ass, ext tube - $209.08
• Replace all waste under sink w/o disposal abs/pvc cont waste, p-trap, assembly, d/w tee (replaces all piping up to basket strainers) - $206.95
• Replace all waste under sink w/o disposal, pvc/abs cont waste, p-trap, assembly, d/w tee & basket strainer - $335.60
• Replace 1 ½" abs dishwasher wye - $117.03
• Install basket strainer (primary task) - $135.00
• Remove g/d & re-pipe under with new basket strainers - $328.00
• Complete lav waste replacement: cr metal p chrome p-trap with c/o - $235.32
• Lav pop-up replacement chrome cast brass - $190.00
• Replace angle stops & supply lines hot & cold to kitchen or lav faucet - $190.81
• Replace angle stop & ss flex supply to hot or cold side of kit or lav - $148.61
• Replace angle stop & wall flange to lav, k/s or toilet - $126.54
• Replace both ss chrome flexible risers brasscraft 20" - $153.58
• Replace dual outlet stop valve ½" comp x ⅜" od x ⅜" od - $141.83
• Install ball valve for icemaker or humidifier - $140.00
Add ons:
• Replace basket strainer - $79.00
• Install spin & grind basket strainer - $74.00

BATH TUB & SHOWER REPAIRS
Price includes normal installation. Upgrades, difficult access, irregularities, code compliance may be extra.
• Tub trip lever plate & gasket - $123.00
• Replace diverter tub spout only - $144.00
• Replace waste & overflow (toe lift) - $265.00
• Replace waste & overflow with brass trip lever - $275.00
• Replace old style drum trap with p-trap assembly - $335.00
• Stems for hot & cold bath tub faucet & new handles (remodel kit) - $225-$299

Moen faucets
• Old style (one handle) - $181.00
• Posi-temp (one handle) - $230.00

Delta faucets
Old style: seat, springs & ball - $171.00
Monitor: 3 different series - $280.00

TOILET REPAIR AND REBUILD
Price includes normal installation. Upgrades, difficult access, irregularities, code compliance may be extra.
• Rebuild closet tank complete: flush handle, flush valve, flapper, ballcock and tank bolts - $275.66
• Rebuild toilet deluxe, brass ballcock, float, flush valve, tank lever, tank to bowl kit - $299.24
• Install new flush valve with flapper, replace tank bolts, replace tank to bowl - $206.38
• Install new ballcock & ss flex brasscraft supply line - $184.00
• Install new ballcock and check for leaky flush valve - $169.00
• Remove & reset toilet while augering to remove object - $165.00
• Remove & reset toilet new seal & bolts - $179.73
• Remove & reset toilet new seal, bolts & supply line - $194.41
• Replace seal on fluidmaster flush valve - $107.71
• Replace flush handle on toilet w/standard tank handle. Check & adjust linkage - $118.56
• Replace toilet tank float ball & float rod - $111.85
• Install new guide arm in toilet tank - $109.44
• Install new flush ball and lift wires in tank. Test operation - $129.46
• Install new flapper & chain in tank. Adjust linkage & check - $129.00
• Replace toilet supply, ss flex brasscraft supply - $128.47
• Replace angle stop & supply to toilet. Test operation - $184.08
• Sloan replace flushmate cartridge - $175.40
• Sloan closet flush valve rebuild: main kit handle & vacuum breaker Kit. Test operation - $211.40
• Install a-36-a closet repair kit in sloan flush valve - $153.39
• Install a-38-a water saver repair kit in sloan flush valve - $156.35
• Install a-19-ac closet relief valve in sloan flush valve - $135.03
• Replace a-15-a molded disc in sloan flush valve - $132.74
• Replace a-56-aa washer set in sloan flush valve - $148.95
• Replace a-156-a closet diaphragm in sloan flush valve - $135.03
• Replace a-163-a guide in sloan flush valve - $132.37
• Replace b-32-a handle assembly on sloan flush valve - $145.25
• Replace h-553 o-ring in sloan flush valve - $122.92
• Install b-50-a handle repair kit on sloan flush valve - $128.13
• Replace v-500-aa vacuum breaker ¾-1 & ½ x 9" on sloan flush valve - $159.29
• Replace v-500-a vacuum breaker - $162.16
• Replace v-100 vacuum breaker repair kit - $139.74
• Replace sloan valve no. 110-3 - $330.43

Toilet add ons
• Clean rim holes & siphon jet hole - $29.00
• Install new flapper & chain in tank. Adjust linkage - $29.00
• Replace toilet supply, ss flex brasscraft supply - $29.00
• Replace angle stop to toilet. Test operation - $84.08
• Replace toilet seat, elongated open front seat less cover white - $62.44
• Replace toilet seat, elongated open front seat less cover black - $72.44
• Replace toilet seat, ex-heavy elongated open front seat less cover wht - $92.76
• Replace toilet seat, ex-heavy elongated open front seat less cover blk - $103.76
• Toilet seat round wood white - $49.28
• Install round plastic white toilet seat bemis - $82.69
• Install elongated bowl white toilet seat wood bemis - $92.09
• Install elongated/round bowl white big john seat 1200lb rating - $188.67

URINALS
• Remove and re-hang urinal or wall hung toilet - $210.91
• Rebuild sloan urinal flush valve kit, handle, vacuum breaker - $211.40
• Install a-37-a urinal repair kit in sloan flush valve - $153.39
• Replace a-19-au urinal relief valve in sloan flush valve - $135.03
• Replace a-56-a urinal diaphragm in sloan flush valve - $136.15
• Replace sloan urinal flush valve no. 180 - $334.10
• Replace sloan urinal flush valve no. 186 - $330.43

MISCELLANEOUS
• Extend closet (toilet) drain pipe if it´s 1 ½" or so below floor (ballpark) - $200-300 (ballpark)
• Replace 1.6 tank only on toilet. Suggest replacing whole toilet - $245.00
• For $395.00 – new 1.6´s are better than old 1.6 gallon

DRAIN CLEANING & SEWER LINE CLEAN-OUT
Price includes normal installation. Upgrades, difficult access, irregularities, code compliance may be extra.
• Locate clean out to main drain line. Clear drain out to city sewer line up to one hour of service & 100 feet of line - $134.50
• Additional cable adds ½ hr time - $48.00
• Clear kitchen sink, laundry tub, bath sink, or bath tub drain (up to 30 minutes of service) - $99.50
• Add 2nd inside line (up to 30 minutes of service) - $69.00
• Additional time - $24.00
• 2nd tech charge ½ hr job time (24.00 each add ¼ hr) - $99.50
• Camera drain line (up to one hour of service) - $179.00
• Camera drain line add on - $129.00
• Camera locate two techs up to 1 hr - $324.00

SEWER & WATER LINE DIG UP & REPAIR
Price includes normal installation. Upgrades, difficult access, irregularities, code compliance may be extra.
• Install up to 10ft pipe 8 feet deep (spot repair) - $2500.00
• Install clean out not over 5 feet deep - $1600.00
• Replace 60 feet of 4-6" sewer line - $6000.00

GAS WATER HEATER REPAIR
Price includes normal installation. Upgrades, difficult access, irregularities, code compliance may be extra.
• Water heater t & p replacement - $149.00
• Replace drain valve on water heater - $139.00
• Replace water shut off with ¾” ball valve - $173.72
• Replace water shut off with 1” ball valve - $215.16
• Remove anode rod from gas water heater - $150-$175
• Pull & clean heater burners - $149.15
• Replace zone valve Honeywell - $298.00
• Replace circulating pump grundfos - $349.00
• Replace standard t-stat - $179.00

ELECTRIC WATER HEATER REPAIR
Price includes normal installation. Upgrades, difficult access, irregularities, code compliance may be extra.
• Rebuild residential w/h thr 4500w elements, reset, both t-stats - $299.00
• Rebuild residential w/h sc lifetime 45002 elements, reset, both t-stat - $330.42
• Rebuild residential w/h fl 4 bolt 45002 elements, reset, both t-stats - $296.15
• Rebuild single element w/h with element, t-stat, reset, t & p valve - $215.16
• Rebuild single element w/h with lifetime element ,t-stat ,reset, t & p - $237.13
• Install heat traps hot and cold side - $239.46
• Replace bolt-in 4500w elements - $199.01
• Replace both screw-in 4500w elements - $201.00
• Replace both screw-in 4500 elements lifetime - $233.29
• Remove & replace one screw in w/h element 4500 watt - $160.57
• Remove & replace one screw in w/h element 4500 watt lifetime - $176.73
• Remove & replace flange-type w/h element 4500 watt - $159.60
• Replace top t-stat, limit & lower t-stat (all electronics) - $200.76
• Replace only top t-stat & limit on w/h - $158.28
• Replace bottom t-stat on dual element w/h. Rebuild recommended - $120.66
• Replace t-stat on single element w/h - $180.58
• Remove & replace t & p valve on w/h - $144.59
• Replace drain valve on w/h ¾" - $143.53
• Replace water shut off with ¾" ball valve - $199.41

CENTRAL HEATING BOILER REPAIR
Price includes normal installation. Upgrades, difficult access, irregularities, code compliance may be extra.
• Diagnose water heater or boiler problem (additional parts & labor extra) - $104.00 • Clean/adjust pilot and burner assembly - $149.15
• Clean/adjust pilot and burner assembly. Replace thermocouple - $180.15 • Replace thermocouple & re-light pilot only - $165.00
• Replace std gas control valve on residential gas control thermostat valve. Disassembly and clean - $289.51
• Replace natural gas regulator valve maxitrol to outlet pressure 4"-14" w. c., capacities to 2, re-light gas appliances - $225.65

PIPE THAWING, STEAMING, JETTING
Price includes normal installation. Upgrades, difficult access, irregularities, code compliance may be extra.
• Thaw frozen water line (first 30 minutes of service) - $185.00 ($37.50 per ¼ hour thereafter)
• Thaw frozen drain line (first 30 minutes of service) - $150.00 ($24 per ¼ hour thereafter)
• Thaw frozen sewer/drain line w/jetter (first hour of service) - $375.00 ($50.00 per ¼ hour thereafter)
• Thaw frozen mobile home lines (first hour of service) - $275.00 ($47.50 per ¼ hour thereafter)
• Jet main line (first hour of service) - $375.00 ($50.00 per ¼ hour thereafter)
• Thaw frozen water main from house to street (up to 2 hours 2techs) - $750.00 min.

WATER PIPE, VALVE, RZP REPAIRS & REPLACEMENT
Price includes normal installation. Upgrades, difficult access, irregularities, code compliance may be extra.
• Repair ½" copper water line up to 2 feet - $176.63
• Repair ¾" copper water line up to 2 feet - $215.00
• Repair 1" copper water line up to 2 feet - $229.08
• Repair 1 ¼" copper water line up to 2 feet - $240.00
• Repair leak in ¾" copper service up to 5 feet swedge in, silver solder, and flare new line - $423.26
• Repair leak in 1" copper service up to 5 feet swedge in, silver solder, and flare new line - $450.89
• Replace wilkins 750 dc w/atm vent b642 ½ inc - $285.15
• Replace ¾" main building valve before meter (water off) - $234.08
• Replace ¾" main building valve after meter - $186.86
• Replace ¾" main building valves before & after - $289.24
• Replace 1" main building valve before meter - $251.06
• ¾" pressure regulator change out up to 300 psi dropped to 25-75 psi - $310.00
• Install ¾ pressure regulator after shut off up to 300 psi to 25-75 psi - $317.43
• Replace threaded hose bib with vacuum breaker ¾" made in USA (2nd hb & vb add $75.00 p&l) - $159.95
• Replace soldered hose bib with vacuum breaker ¾" made in USA (2nd hb & vb add $95.00 p&l) - $179.95
• Repair water leak under mobile home - $309.05
• Replace soldered self draining silcock w/vb Woodford ¾" made in USA (2nd add $125.00 p&l) - $249.00
• Replace outside faucet & shut off valve - $348.00
• Replace outside faucet with woodford frost proof faucet - $249.00
• Replace shut off valve to outside faucet - $185.00
• Outside faucet repair - $130-185
• Brand new install of sillcock and up to 10 feet of pipe - $493.00
• Move outside sillcock up to 10 feet - $355.00
• Install vacuum breaker for spinkler system up to 20tf of pipe - $445.00
• Supply & install reverse osmosis - $895.00
• Replace zone valve on boiler (ballpark) - $325.00
Well pressure tanks (haul away incl. If paying std rate otherwise $20 if paying value rate)
• 20 gallon installed - $525.00
• 32 gallon installed - $699.00
• 44 gallon installed - $799.00

GAS PIPE INSTALL & REPAIR
Price includes normal installation. Upgrades, difficult access, irregularities, code compliance may be extra.
• Spot repair natural gas 2 pound line coming in from outside (accessible) - $242.62
• Spot repair natural gas line (accessible) - $198.62
• Replace gas valve ½ inch - $149.60
• Replace main gas valve ¾ inch - $195.00
• Run new gas line for BBQ grill from meter (plus permit) excludes digging - $550.00-1200.00

REMODELING PROJECT PLUMBING
Price includes normal installation. Upgrades, difficult access, irregularities, code compliance may be extra.
• Run waste, water & vent for ¾ bath in basement (bust up floor & patch) set fixtures (fixtures not included) - $2875.00 ballpark
• Run waste, vent & water for ¾” bath in basement (cust. busts up floor & patch) set fixtures (fixtures not included) - $2075.00 ballpark
• Rough in only - ¾ bath (does not include fixtures and faucets) - $1260.00 ballpark
• Finish half bath: drain already roughed in floor. Run water lines and set fixtures (toilet and sink not included) - $550-1050 ballpark
• Finish three quarter bath: drain already roughed in floor. Run water lines and set fixtures (toilet, tub or shower and sink not included) - $850-1450 ballpark
• Repipe single story home (900-1000 sq ft) from galvanized to copper (kitchen, bathroom, outside faucet includes new valves @ meter) - $2000.00 ballpark