Rheem Fury Gas Standard Vent

Installed price: Please see pricing below
Installed price includes normal installation. Upgrades, difficult access, irregularities, code compliance may be extra.
City Permits are required by most cities for gas water heaters and are an additional charge per your City permit rates.

• Features the Guardian System – engineered to exceed ANSI standards for flammable vapor ignition resistance
• 30, 40 and 50 gallon tall capacities
• 30, 40 and 50 gallon short capacities
• High efficiency models feature high performance and lower operating cost

Features:
• Guardian System™ - One-of-a-kind air/fuel shut-off device offers double protection, maintenance free - no filter to clean, standard replacement parts.
• Low NOx design for low nitrous oxide emissions
• Self-Cleaning - EverKleen™ patented system fights sediment build-up, reduces fuel costs, provides more hot water.
• Easy to Light - no matches required
• Energy Efficient - more hot water at low operating cost
• Longer Life - Patented magnesium anode rod design incorporates a special resistor that protects the tank from rust.
• Brass drain valve and temperature and pressure relief valve included.
• Upgrade your warranty with ProtectionPlus and your 6-year limited tank warranty becomes a 10 year.

Fury Gas Standard Vent
Tall
• 22V30-30F 30 GALL...$1040.00
• 22V40F 40 GALL...$928.00
• 22V50F 50 GALL...$1034.00
Short
• 22V30S-30F 30 GALL...$1040.00
• 42V40SF 40 GALL...$928.00
• 42V50SF 50 GALL...$1361.00
Download Spec Sheet

Rheem Fury Gas Heavy Duty Standard Vent

Installed price: Please see pricing below
Installed price includes normal installation. Upgrades, difficult access, irregularities, code compliance may be extra.
City Permits are required by most cities for gas water heaters and are an additional charge per your City permit rates.

• Designed for high volume hot water applications
• High BTU input for fast recovery
• 50 60, and 75 gallon tall capacities
• Heat saving flue baffle design
• Extra durable brass drain valve

Features:
• Designed for high volume applications
• High BTU input for fast recovery
• Extra durable brass drain valve preferred by professional plumbers
• Heat saving flue baffle design
• Temperature and pressure relief valve included
• Extra durable high temperature dip tube to meet the most stringent plumbing codes

Fury Gas Heavy Duty Standard Vent
Tall ONLY
• 42V50-50F 50 GALL...call for pricing
• 42V50-65F 50 GALL...call for pricing
• 42V60F 60 GALL...call for pricing
• 42V75F 75 GALL...$1687.00
Download Spec Sheet

Rheem Professional Series Gas Standard Vent

Installed price: Please see pricing below
Installed price includes normal installation. Upgrades, difficult access, irregularities, code compliance may be extra.
City Permits are required by most cities for gas water heaters and are an additional charge per your City permit rates.

• Designed for professionals by professionals
• Features the Guardian System – engineered to exceed ANSI standards for flammable vapor ignition resistance
• 40 and 50 gallon tall capacities
• 40 gallon capacities short capacities

Features:
• Guardian System™ - engineered to exceed ANSI standards for flammable vapor ignition resistance - a Rheem exclusive
• One-of-a-kind air/fuel shut-off device offers double protection
• Maintenance free - superior air filtration prevents the flame arrestor from becoming clogged by lint, dust, and oil
• Low NOx design for low nitrous oxide emissions
• EverKleen™ patented system fights sediment build-up, reduces fuel costs, provides more hot water
• Easy to light- no matches required
• Energy efficient - more hot water at a low operating cost
• Longer life - patented magnesium anode rod design incorporates a special resistor that protects the tank from rust
• Brass drain valve and temperature and pressure relief valve are included
• Upgrade your warranty with ProtectionPlus and your 8 year becomes a 12 year water heater

Professional Series Gas Standard Vent
Tall
RHGPRO40-40F 40 GALL...$1091.00
RHGPRO50-40F 50 GALL...$1253.00
RHGPRO50-50F 50 GALL...$1496.00
Short
42VR40SPROF 40 GALL...$1091.00
Download Spec Sheet

Rheem Professional Series Gas Heavy Duty Standard Vent

Installed price: Please see pricing below
Installed price includes normal installation. Upgrades, difficult access, irregularities, code compliance may be extra.
City Permits are required by most cities for gas water heaters and are an additional charge per your City permit rates.

The perfect match for high volume hot water applications
Higher BTU inputs for faster recovery and more hot water
60 and 75 gallon tall capacities


Features:
Guardian System™ - One-of-a-kind air/fuel shut-off device offers double protection
Maintenance free – no filter to clean
Standard replacement parts
Environmentally Friendly Burner - Low NOx design for low nitrous oxide emissions
Self-Cleaning (60 gallon model only) - EverKleen™ patented system fights sediment build-up
Reduces fuel costs
Provides more hot water
Easy to Light - No matches required
Energy Efficient - More hot water at low operating cost
Longer Life - Patented magnesium anode rod design incorporates a special resistor that protects the tank from corrosion
Plus...Brass drain valve and temperature and pressure relief valve are included
Meets or exceeds National Appliance Energy Conservation Act (NAECA) requirements

Professional Series Gas Heavy Duty Standard Vent
Tall ONLY
RHGPRO60F 60 GALL...call for pricing
RHGPRO75F 75 GALL...$1796.00
Download Spec Sheet

Rheem Power Vent Series Gas

Installed price: Please see pricing below
Installed price includes normal installation. Upgrades, difficult access, irregularities, code compliance may be extra.
City Permits are required by most cities for gas water heaters and are an additional charge per your City permit rates.

• Induced draft with the Guardian FVIR System
• Flexible venting options up to 100 feet
• 40 and 50 gallon tall and short capacities
• Integrated self-diagnostic system control, thermostat and gas valve
• SCAQMD rule 1121 compliant models available: 10ng/J NOx emissions

Features:
• Guardian System™ - Air/fuel shut-off system offers double protection, maintenance free-no filter to clean
• Flammable Vapor Detection Sensor - protective control system that disables the heater in the presence of flammable vapor accumulation
• Long venting lengths up to 100 feet
• PVC, ABS, or CPVC vent pipe options
• Vertical or horizontal termination
• New Quiet Blower - less noise than ever before
• Self-Diagnostic System
• Environmentally Friendly Low NOx Burner
• Self-Cleaning - EverKleen™ patented system fights sediment build up
• Reduces fuel costs and provides more hot water
• Patented magnesium anode rod design incorporates a special resistor that protects the tank from corrosion for longer life
• Standard 110 volt electrical connection

Power Vent Gas
Tall
43VP40E2 40GALL...$1477.00
43VP50E2 50 GALL...$1638.00
42VP75F 75 GALL...$2532.00
Short
43VP40SE2 40 GALL...$1477.00
43VP50SE2 50 GALL...$1638.00
Download Spec Sheet 40 & 50 Gall
Download Spec Sheet 75 Gall

Rheem Fury Electric

Installed price: Please see pricing below
Installed price includes normal installation. Upgrades, difficult access, irregularities, code compliance may be extra.

30, 40, 50, 80 gallon tall capacities
30, 40 and 50 gallon short capacities
Engineered components for longer life – resistored heating elements, premium grade anode rod



Features:
• EverKleen™ self cleaning device
• Brass drain valve
• Temperature and pressure relief valve included
• Isolated tank design reduces conductive heat loss
• High efficiency resistored heating elements
• Anode rod equalizes aggressive water action
• Electric junction box located above heating elements for easy installation
• Over-temperature protector automatically cuts off power in excess temperature situations
• Automatic thermostat keeps water at desired temperature

Fury Electric
Tall
82V30-2 30 GALL...$832.99
82V40-2 40 GALL...$763.00
82V52-2 50 GALL...$802.00
82V80-2 80 GALL...call for pricing
Short
82SV30-2 30 GALL...call for pricing
82SV40-2 40 GALL...call for pricing
82SV50-2 50 GALL...$901.00
Download Spec Sheet

Rheem Professional Series Electric

Installed price: Please see pricing below
Installed price includes normal installation. Upgrades, difficult access, irregularities, code compliance may be extra.

Designed for professionals by professionals
40, 50, 80 tall gallon capacities
30, 40, 50 short gallon capacities
Engineered components for longer life – resistored heating elements, premium grade anode rod


Features:
Brass drain valve
Stainless steel lower heating element
EverKleen™ self cleaning device
Premium grade anode rod
Temperature and pressure relief valve included
Exclusive Rheemglas® tank lining resists corrosion and prolongs tank life
Isolated tank design reduces conductive heat loss
Electric junction box located above heating elements for easy installation
Over-temperature protector cuts off power in excess temperature situations
Automatic thermostat keeps water at desired temperature
Compliant with many electric utility incentive programs

Professional Series Electric
Tall
RHEPRO40-2 40 GALL...call for pricing
RHEPRO52-2 50 GALL...call for pricing
RHEPRO80-2 80 GALL...call for pricing
Short
RHESPRO30-2 30 GALL...call for pricing
RHESPRO40-2 40 GALL...call for pricing
RHESPRO50-2 50 GALL...call for pricing
Download Spec Sheet

Rheem Marathon Series Electric

Installed price: Please see pricing below
Installed price includes normal installation. Upgrades, difficult access, irregularities, code compliance may be extra.

The most durable electric water heater ever made
High efficiency design and a lightweight tank that won’t corrode
50, 85 and 105 gallon tall capacities
Seamless polybutene tank – impervious to rust and corrosion


Features:
• Seamless, blow-molded, polybutene tank - impervious to rust and corrosion
• Multiple layers of filament wound fiberglass give the tank unmatched strength
• Polyurethane Envirofoam™ insulation helps reduce energy consumption
• The highest energy factors (EF) available!
• Pipe wrap energy saving kit included to achieve maximum energy savings
• Recessed drain valve is out of the way of brooms and scrubbers
• Tough molded polyethylene outer shell resists dents and scratches
• Bowl shaped bottom allows complete sediment draining
• High temperature polysulfone dip tubes
• Thermally fused upper element provides protection against "dry-firing" - stainless steel incoloy lower element for resistance to lime build-up
• Factory installed conduit between element control boxes
• All plastic tank eliminates the need for an anode rod
• Factory installed temperature and pressure relief valve
• Factory installed vacuum relief valve

Marathon Series Electric
Tall ONLY
MR50245 50 GALL...call for pricing
MR85245 85 GALL...call for pricing
MR105245 105 GALL...call for pricing
Download Spec Sheet